Wooden sales booth M150 – 303 x 199 cm – 6 m2

We only use high-quality FSC® C110730 certified dried and planed pine/spruce. High-quality wood has minor and fine branching, smooth and light color. Wood is a natural raw material that varies according to natural weather conditions.

Therefore, small cracks and discoloration are not defects in the wood but characteristics of the wood as a natural raw material.

The small gaps that appear between the boards are also a reaction of the natural material. If the product has been properly treated, after some time the wood’s “movements” stop.

Due to the natural characteristics of the wood, product dimensions may vary by 1–2 mm.

Untreated wood can turn blue or grow mold. To protect the wood, you must coat the wooden parts on all sides with a wood impregnator before assembling the product.

It is possible to distinguish shades between the different boards. But these differences are reduced with sunlight. It has no effect on the product stability.

Untreated wood can develop blue stains or mold. To protect the timber, you must apply a wood preservative to all wooden parts from all sides before assembling the product. The treatment must be done only when the wood is completely dry. Treating or painting damp wood poses a high risk of mold growth.
We recommend repainting the house every 3 years, or more frequently if needed.

Proper ventilation is essential to prevent moisture buildup inside the wooden house – ventilate regularly and ensure air can circulate freely.

To ensure the longevity of your wooden house, we recommend performing the following checks at least once per season:

– Inspect for any cracked or damaged boards.

– Check the condition of the roof covering – look for damage or gaps that could let water in and damage the structure.

– Look for signs of moisture accumulation or mold.

– Remove any debris or fallen leaves around the base of the house – this helps prevent moisture buildup.

Our products come with a 2-year warranty. The guarantee starts on the date of invoicing. The warranty is valid only when the product is assembled following the assembly instructions. The warranty only covers the replacement of defective parts! All wooden parts are delivered in their natural state and must be treated following the instructions.

To avoid possible mistakes when assembling the hut, we recommend checking the product parts list and sorting the parts before installation. This check must be carried out within 14 days from the date of purchase. The warranty only applies to defective parts that have not yet been installed in the product. Defective parts that have already been treated and used in the product are not covered by the warranty!

In order to benefit from this guarantee, the Buyer must inform the Seller in writing of any damage or defect in the Goods at sale@timbela.com. In the event of a defect or damage to the goods, the Buyer must provide detailed photographs of the goods and a list of the damaged (defective) parts. Please also include the LOT number indicated in the installation instructions.

Product manufacturer: Timbela ir Ko
Address: Ryternos g. 3B-2, Biruliškės, LT-54469, Lithuania
Email: sale@timbela.com

Wooden Shed – EN – SDS

All products are packed on pallets and delivered by 19T heavy goods vehicles equipped with lifts. The product is delivered to the Buyer unassembled. The parts are packed on a pallet, protected by a black film.

Order is delivered as close to the house as possible! If a large vehicle cannot enter the yard, the load is unloaded where access is available, so make sure that a large 19T truck can reach your home before purchasing the product.

Telephone number REQUIRED for delivery. If the buyer cannot be contacted, the courier will not be able to deliver the goods! Make sure that the packaging has not been damaged during transportation.

The product you have purchased is manufactured, tested, and packaged according to high-quality standards and controls.

We recommend:

– Store the packaged product in a dry, dark place without direct contact with the ground.

– Protect from sun and moisture.

Be sure to check with the local building department and homeowners’ association for specific restrictions and/ or requirements before building. Please read the instructions carefully before starting to assemble the hut to avoid any mistakes when assembling and using the product you have purchased.

Check that the packaging contains all the parts mentioned in the instructions and sort them.

Before installation, we recommend treating the boards twice on all four sides with a water-based impregnant to protect the wood from cracks, deformation due to the influence of the sun and moisture, fungus, insects and blackening.

Installing a garden house begins with preparing a perfectly level and square foundation. The minimum distance between the upper edge of the foundation and the first wall/floor element of the garden house should be 45 mm. Pouring a concrete foundation is not essential for that purpose, lightweight construction blocks, concrete slabs or posts are also suitable as a base. A damp-proof barrier should be used between the foundation and the wood structure. When choosing a spot for the hut, please make sure the hut will not be exposed to extreme weather conditions (strong winds or snow). Otherwise, you should additionally use anchors.

A roof felt as a covering material (if included in the set) is designed for short-term (1 year) use only. If you want to protect your garden house roof from moisture and adverse weather, you must apply additional final roof cover (example – bituminous roof shingles). When installing the roof felt overlap between pieces must be min 8cm.